All Chippers | AAWC4 | RC6D35 | Beever 812 | Beever 1215 | Beever 1415 | Beever 1415 Track | Beever 1621 | Beever 1821 | RC1824 | Beever 2021 | Beever 2230 | 2230 Forestry

Morbark Beever 1821 18-inch capacity Wood Chipper

Our Beever™ 1821 18-inch capacity Wood Chipper is ideal for residential tree services, utility line clearing, vegetation management, maintenance contractors and municipalities, this high-capacity, high-production chipper includes more standard features than any other chipper in its class.

The Beever 1821 Brush Chipper is also available tracked for right of way clearing, highway clean-ups and hard-to-reach areas requiring a self-propelled unit for material access.

The powerful TorqMax™ dual feed wheel compression system generates more than 6,600 lb./ft. (9,822 kg/m) of material pulling force. Many customer-inspired innovations are featured on the 1821 , increasing efficiency and safety while reducing operating and maintenance costs. Unit is pre-plumbed and outfitted for the easy installation of most aftermarket components. Ergonomic infeed design provides consistent feed control bar activation.

Like all Morbark equipment, the 1821 is a long-lasting, durable machine backed by a world-class parts and service support team.

More Info: Morbark Website

Morbark M15R Wood Chipper

30″ (76.2cm) diametre four-knife staggered knife-pocket drum with patented removable knife holders and Vortex chambered air-impeller system provides maximum chipping efficiency.

Morbark M15R Wood Chipper

Channel Frame:
The 8.2 lb. (3.72kgs), 6″ (15.24cm) channel frame rails with 2″ (5.08cm) x 6″ (15.24cm) tubular steel frame with cross bracing increases structural strength while maintaining low unit weight.

Morbark M15R Wood Chipper

Reversing Auto-feed:
The reversing auto-feed system automatically stops forward feed and briefly backs material away from the drum for optimum engine performance while chipping.

Morbark M15R Wood Chipper

Hydraulic Down Pressure:
The Variable Force™ Hydraulic Down Pressure System eliminates the use of springs and creates up to 4,500 lbs. (2,041.17 kgs) of perpetual down pressure.

Morbark M12R Wood Chipper

Track Undercarriage:
Take the chipper to the material with optional 400 mm rubber tracks, 4.84 PSI ground pressure, low-speed travel range of 1.0 MPH (1.6 kph) and high-speed travel range of 1.8 MPH (2.9 kph).

  • Dual horizontal feed wheels with TorqMax top feed wheel compression system, hydraulic lift assist, Variable Force constant hydraulic down pressure system with additional manually applied hydraulic down pressure at the valve handle and direct drive bottom feed wheel with torque arm coupler
  • Live hydraulic system including: ball valve, pump, motor, and valve bank with additional pre-plumbed valve section for installation of an aftermarket winch package
  • 3″ (7.62cm) x 5″ (12.7cm) tubular steel telescoping drawbar with two 12″ (30.48cm) extensions
  • Morthane Paint System: A chemically cured, electrostatically applied urethane coating with high-gloss finish, built-in UV protection, chip and chemical resistance and corrosion protection

  • Chipping capacity: 18″ (45.72cm)
  • Height: 8’11” wheeled (271.78cm) / 8’6″ (259.08cm) tracked
  • Width: 7’3″ (220.98cm) wheeled / 7’10” (238.76cm) tracked
  • Length: 18’1″ wheeled (551.18cm) / 16′ (487.68cm) tracked
  • Gross weight (approximate): 8,900 lbs. (4,036.97kgs) wheeled / 13,500 lbs. (6,123.5kgs) tracked
  • Suspension: 9,000 lb. (4,082.331kgs) Torflex
  • Infeed opening: 56″ (142.24cm) wide x 37″ (93.98cm) high
  • Throat opening: 20 ½” (52.07cm) wide x 18″ (45.72cm) high wheeled / 20 ½” (52.07cm) wide x 15″ (38.1cm) high tracked
  • Drum: 23 ¾” (60.3cm) wide x 30″ (76.2cm) diametre
  • Engine: Cummins diesel
  • Horsepower: 170 HP
  • Fuel capacity: 32 gallons (121.1 litres)
  • Hydraulic oil capacity: 12 gallons (45.4 litres) wheeled / 26 gallons (98.4 litres) tracked
  • Frame: 8.2 lb. (3.72kgs), 6″ (15.24cm) channel wheeled / 6″ (15.24cm) x 2″ (5.08cm) x 1/4″ (0.635cm) wall tube
  • Tyres : (2) 215/75Rx17 ½” / Rubber track undercarriage
  • Hitch: 2 ½” (63.5mm) Pintle

  • ChipSafe®Operator Safety Shield
  • Winch package: heavy-duty, 5,000 lb. (2267.96kgs) pull capacity with rope and 10′ (304.8cm) chafe guard
  • Bottom Bump Bar
  • Hydraulic Swivel Discharge
  • Cone Holder
  • Spare Tyre/Mount
  • Folding Infeed Tray
  • Flow Control
  • Axle Options Available
  • Fender Options Available
  • Battery Box Options Available

Make an Enquiry

Your Name

Your Email

Your Company

Your Phone

Your Location

I would like to enquire about the ...

How did you hear about us?

What is your enquiry?

Tick below if you wish to receive exclusive offers from Global Machinery Sales.
Yes, I would like to.

Contact Us


Global Machinery Sales
24-28 Williams Road, Dandenong South VIC. 3175 Australia
Ph: 1300 072 926
Fax: 03 9791 7676


Global Machinery Sales
49-50 Cassola Place, Penrith, NSW 2750 Australia
Ph: 1300 072 926
Stuart Samson: 0478 351 788
Request a Demo
Enquire about Finance

About us

Global Machinery Sales supplies the Arbor, Forestry, Access and Farming Industries with quality Wood Chippers, Stump Grinders, Forestry Mowers, Horizontal Grinders, Log Splitters, Spider Lifts, Mini Loaders and Recycling Equipment from leading brands such as Morbark, Rayco, CMC, Timberwolf and Angry Ant.

Mon-Fri: 8am – 5pm

Follow us


Subscribe to our newsletter to stay up-to-date on all the latest industry news, our news and to receive exclusive offers.

Your Name (required)

Your Email (required)

Which Number is Bigger 1 or 10? (required)