All Chippers | AAWC4 | RC6D35 | Beever 812 | Beever 1215 | Beever 1415 | Beever 1415 Track | Beever 1621 | Beever 1821 | RC1824 | Beever 2021 | Beever 2230 | 2230 Forestry

Morbark Beever 1215 12-inch capacity Wood Chipper

With its power and easily transportable design, the compact and economical Beever 1215 12 inch chipper is the ideal unit for power line clearing, residential tree services, rental yards and councils.

The dual-sided, chambered air impeller system increases chip-throwing velocity and reduces dust and material blowback out the infeed to pack more into the chip truck.

The 18-inch (45.7cm) diametre single top feed wheel easily climbs over material, reduces drag and increases chipping efficiency.

Like all Morbark equipment, the Beever 1215 is a long-lasting, durable machine backed by a world-class parts and service support team.

More Info: Morbark Website

Morbark M12RX Wood Chipper

Infeed Opening:
The 60″ wide x 31″ high chute opening and 15″ wide x 12″ high throat opening allows for easy feeding of branchy material and reduced saw labour.

Morbark M12RX Wood Chipper

Drive Belt Cover:
Drive belt inspection cover provides easy access for drive system maintenance.

Morbark M12RX Wood Chipper

Feed Wheel:
TorqMax Top Feed Wheel Compression system with spring-assisted down pressure generates more than 4,762 kg/m (3,200 lb./ft.) of material pulling force.

Morbark M12RX Wood Chipper

New Style Discharge:
360° swivel discharge with chip deflectors puts chips right where they’re needed without removing the Beever from the tow.

Morbark M12RX Wood Chipper

Be Safe. Get ChipSafe.
The ChipSafe® Operator Safety Shield — the latest safety innovation for Morbark Beever™ Brush Chippers. Learn more.

  • 21.375″ diametre x 14.25” wide staggered-knife- pocket drum with two dual-edged chipper knives and dual-sided chambered air impeller system.
  • Reversing automatic feed system
  • Enclosed engine with gauge panel, radiator fines screen and slide rails for belt adjustment
  • Fuel tank sight gauge and drain plug
  • Hydraulic tank shut-off valve, drain plug and clean-out cover
  • Live hydraulics; ball valve, pump, motor and control valve
  • Tube and support pad to mechanically raise and lower feed wheel using the drawbar jack
  • 5″ (12.7cm) x 3″ (7.6cm) tubular steel telescoping drawbar with two 12″ (30.5cm) extensions

  • Chipping capacity: 12″ (30.5cm)
  • Height: 274.3 cm
  • Width: 180.3 cm
  • Length: 467.4 cm
  • Gross weight: 2,358.7 kgs
  • Suspension: 2,721.5 kgs torsion
  • Infeed opening: 60″ (152.4cm) wide x 31″ (78.7cm) high
  • Throat opening: 15″ (38.1cm) wide x 12″ (30.5cm) high
  • Drum: 14.25″ (36.2cm) wide x 21.375″ (54.3cm) diametre
  • Engine: CAT diesel
  • Horsepower: 97 HP
  • Fuel capacity: 92.7 litres
  • Hydraulic capacity: 64.4 litres
  • Frame: 3.72 kgs, 6″ (15.2cm) channel
  • Tyres: (2) 235/80Rx16″
  • Hitch: 63.5 mm Pintle

Make an Enquiry

Your Name

Your Email

Your Company

Your Phone

Your Location

I would like to enquire about the ...

How did you hear about us?

What is your enquiry?

Tick below if you wish to receive exclusive offers from Global Machinery Sales.
Yes, I would like to.

Contact Us


Global Machinery Sales
24-28 Williams Road, Dandenong South VIC. 3175 Australia
Ph: 1300 072 926
Fax: 03 9791 7676


Global Machinery Sales
49-50 Cassola Place, Penrith, NSW 2750 Australia
Ph: 1300 072 926
Stuart Samson: 0478 351 788
Go To Rentals
Try before you buy…
This machine is available to rent!
Go To Rentals
Request a Demo
Enquire about Finance

About us

Global Machinery Sales supplies the Arbor, Forestry, Access and Farming Industries with quality Wood Chippers, Stump Grinders, Forestry Mowers, Horizontal Grinders, Log Splitters, Spider Lifts, Mini Loaders and Recycling Equipment from leading brands such as Morbark, Rayco, CMC, Timberwolf and Angry Ant.

Mon-Fri: 8am – 5pm

Follow us


Subscribe to our newsletter to stay up-to-date on all the latest industry news, our news and to receive exclusive offers.

Your Name (required)

Your Email (required)

Which Number is Bigger 1 or 10? (required)